Magnetic/ Single Pin / Multi-pins
A pogo pin or spring-loaded pin is a type of electrical connector mechanism. The conducting surface is gold plated which provides great corrosion resistance, enhances its mechanical strength and electrical conductivity.
Pogo pin combines the advantages of fine pitch, high current, and long lifetime that can be widely used in industrial, medical, and consumer applications.
Applications
- Bicycle/ eBike
- Wearable
- Portable Device
- ePaper Display Device
- Tracking Device
- Medical Device
- Easy, fast connection
- High number of mating cycles
- Breakaway function
- High stroke
- Long Lifetime
- Stable Current Flow
- Cable design and Assembly with Magnetic connector
- Automotive
- Aviazione
- Cavi, cablaggi e pannelli
- Comunicazioni e broadcast
- Informatica e archiviazione
- Elettronica di consumo
- Schede di sviluppo
- Produzione industriale
- Internet delle cose
- Settore medico
- Energia rinnovabile
- Robotica e automazione
- Tecnologia per case intelligenti
- Trasporti e infrastrutture
Thermal insulation components are composed of high-performance elastomer insulation material with a special film as the base material.
Thermal pads are available in different types: silicone (insulated), non-silicone, and carbon fiber (with also electrical conductivity)-Thermal conductivity value from 2 W/mk to 40 W/mk.
Silicone thermal pads
Stable physical properties, strong product toughness, good resilience, not easy to tear and puncture. 12 W/mk heat-conductive sheet does not deform.
The highest thermal conductivity can reach 12 W/MK.
Non Silicone thermal pads
Carbon fiber thermal pad
Carbon fiber thermal pads have the advantages of low density and good durability. Carbon fiber is an anisotropic and thermally conductive material with excellent thermal conductivity in the thickness direction.
The thermal conductivity is 40W/mk, the minimum thickness is 0.5 mm, and an adhesive can be arranged on one side or both sides.
Thermal gel
Thermal gel is a soft single-component thermally conductive silicone-based gap-filling material with high thermal conductivity, low interfacial thermal resistance, and good thixotropy.
It is used between electronic components by reducing their thermal resistance and temperature, thus extending the life of electronic components and improving their reliability.
Auto-adhesive thermal tape
Auto-adhesive thermal tape for led is widely used to bond heat sink to microprocessor and other power-consuming semiconductors.
With its high adhesive strength and low thermal resistance, it can effectively replace silicone grease and mechanically fixed.
- Power Batteries
- Navigators
- Precision optical equipment, photographic equipment
- Laptop computers
- Mobile and communications equipment
- Automotive engine control equipment
- High-end industrial control and medical electronics
Increasingly, “rugged” connectors, which are resistant to harsh conditions, are in demand. This term, however, borrowed from industries such as aerospace or transportation, does not apply uniquely to connectors because it can refer to a variety of aspects of connector design.
A stable, reliable, and secure contact between an SMT connector and the PCB can be achieved with optimized contact design for soldering purposes.
For example, the contacts of Ept's One27 Connector (SMT Connector) are designed to ensure excellent connection to the pcb during soldering, evidenced by the meniscus formed on the solder. In addition, the One27 connector also has a metal reinforcement, which is also soldered to the pcb so that the connector is anchored to the pcb in an extremely stable manner.
When mating, the connectors can be improved by design at the design stage to increase the stability of the contact even in the presence of vibration. This explains why Ept's female contact is designed double-sided and flexible to ensure that at least one part of the contact is always adhered to the male contact and there are no transmission interruptions. The One27 connector has been tested in a 10-2000Hz frequency range according to IEC 60068-2-6:2007 standards, as well as under 50 G shock according to IEC 60068-2-27:2008.
Particularly in Ept's One27 connector, this has been achieved with a sophisticated design of the female contact and the rounded, very smooth shape of the male contact, which allow for minimal non-homogeneity and angular surfaces that would increase friction.
Due to its design, the One27 connector is rated “Performace Level 1” which results in 500 mating cycles, even in harsh environments such as exposure to corrosive gases (IEC 60068-2-60:2015) or frequent temperature fluctuations (IEC 60068-2-30:2005), without losing any properties over time.
In addition, the extended and rounded contact surface of the female contact allows higher electrical conductivity due to low contact resistance.
The “board lock” described above also fulfills the function of absorbing mechanical forces during assembly. SMT connectors have been positively tested with forces up to 400 N.
During the mating process, high tolerance compensation facilitates assembly. In particular, assembly of Ept's One27 connector is facilitated by the combination of the sophisticated design of the two-sided female contact and the flexibility of the male contact, as well as by the conformation of the insulation material, which allows slanted insertion with a tolerance of 0.7mm in either direction, and a longitudinal angle of ±4° (and transverse angle of ±2°).
In conclusion, the aspects that make a connector robust in all respects are many, with more or less relevant aspects depending on the application.
For example, should the connector be able to absorb mechanical forces during assembly? Or only during operation? Will it be exposed to corrosive environments? Or must they be mated frequently?
The answer to these and many other questions is crucial in determining which aspects are most relevant in choosing the most suitable connector for that specific application.
Orvem with its engineers is the ideal partner to support you in choosing the best and most suitable connector for your applications, together with Ept connectors.
Pogo pin is a type of mechanism for electrical connectors. The conductive surface is gold plated, which gives it great corrosion resistance and improves its mechanical strength and electrical conductivity.
The magnetic Pogo pin connector combines the advantages of high current and long service life, which can be widely used in industrial, medical and consumer applications.
- Easy and fast connection
- High number of coupling cycles
- Detachment function
- Smart wearables
- Office devices
ePaper displays for booking meeting rooms - Medical industry such as
blood pressure monitors, heart rate monitors
Con oltre 50 anni di presenza sul mercato, un punto di riferimento nel mercato dell'elettronica, dai connettori fino allo sviluppo di soluzioni custom tecnologicamente avanzate.
SUPPORTO CLIENTI
Per maggiori informazioni, contattaci inviando una richiesta qui
o chiamando il numero:
CONTATTI
ORVEM SPA
Via Sacco e Vanzetti, 34 | 20099 Sesto San Giovanni | Milano | IT01751610153
email: vendite@orvem.com
